MWH Global

Enviroscan Ukrainian Institute of Speleology and Karstology

Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 5
Community news

Speleology in Kazakhstan

Shakalov on 04 Jul, 2018
Hello everyone!   I pleased to invite you to the official site of Central Asian Karstic-Speleological commission ("Kaspeko")   There, we regularly publish reports about our expeditions, articles and reports on speleotopics, lecture course for instructors, photos etc. ...

New publications on hypogene speleogenesis

Klimchouk on 26 Mar, 2012
Dear Colleagues, This is to draw your attention to several recent publications added to KarstBase, relevant to hypogenic karst/speleogenesis: Corrosion of limestone tablets in sulfidic ground-water: measurements and speleogenetic implications Galdenzi,

The deepest terrestrial animal

Klimchouk on 23 Feb, 2012
A recent publication of Spanish researchers describes the biology of Krubera Cave, including the deepest terrestrial animal ever found: Jordana, Rafael; Baquero, Enrique; Reboleira, Sofía and Sendra, Alberto. ...

Caves - landscapes without light

akop on 05 Feb, 2012
Exhibition dedicated to caves is taking place in the Vienna Natural History Museum   The exhibition at the Natural History Museum presents the surprising variety of caves and cave formations such as stalactites and various crystals. ...

Did you know?

That natural well is (jamaican.) a vertical shaft in limestone, open to the surface and having water at the bottom; similar to a cenote [10]. synonym: (italian.) pozzo carsico.?

Checkout all 2699 terms in the KarstBase Glossary of Karst and Cave Terms

Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 7
What is Karstbase?



Browse Speleogenesis Issues:

KarstBase a bibliography database in karst and cave science.

Featured articles from Cave & Karst Science Journals
Chemistry and Karst, White, William B.
See all featured articles
Featured articles from other Geoscience Journals
Karst environment, Culver D.C.
Mushroom Speleothems: Stromatolites That Formed in the Absence of Phototrophs, Bontognali, Tomaso R.R.; D’Angeli Ilenia M.; Tisato, Nicola; Vasconcelos, Crisogono; Bernasconi, Stefano M.; Gonzales, Esteban R. G.; De Waele, Jo
Calculating flux to predict future cave radon concentrations, Rowberry, Matt; Marti, Xavi; Frontera, Carlos; Van De Wiel, Marco; Briestensky, Milos
Microbial mediation of complex subterranean mineral structures, Tirato, Nicola; Torriano, Stefano F.F;, Monteux, Sylvain; Sauro, Francesco; De Waele, Jo; Lavagna, Maria Luisa; D’Angeli, Ilenia Maria; Chailloux, Daniel; Renda, Michel; Eglinton, Timothy I.; Bontognali, Tomaso Renzo Rezio
Evidence of a plate-wide tectonic pressure pulse provided by extensometric monitoring in the Balkan Mountains (Bulgaria), Briestensky, Milos; Rowberry, Matt; Stemberk, Josef; Stefanov, Petar; Vozar, Jozef; Sebela, Stanka; Petro, Lubomir; Bella, Pavel; Gaal, Ludovit; Ormukov, Cholponbek;
See all featured articles from other geoscience journals

Search in KarstBase

Your search for ramp (Keyword) returned 19 results for the whole karstbase:
Showing 1 to 15 of 19
Shallow-marine carbonate facies and facies models, 1985,
Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 943
Tucker M. E. ,
Shallow-marine carbonate sediments occur in three settings: platforms, shelves and ramps. The facies patterns and sequences in these settings are distinctive. However, one type of setting can develop into another through sedimentational or tectonic processes and, in the geologic record, intermediate cases are common. Five major depositional mechanisms affect carbonate sediments, giving predictable facies sequences: (1) tidal flat progradation, (2) shelf-marginal reef progradation, (3) vertical accretion of subtidal carbonates, (4) migration of carbonate sand bodies and (5) resedimentation processes, especially shoreface sands to deeper subtidal environments by storms and off-shelf transport by slumps, debris flows and turbidity currents. Carbonate platforms are regionally extensive environments of shallow subtidal and intertidal sedimentation. Storms are the most important source of energy, moving sediment on to shoreline tidal flats, reworking shoreface sands and transporting them into areas of deeper water. Progradation of tidal flats, producing shallowing upward sequences is the dominant depositional process on platforms. Two basic types of tidal flat are distinguished: an active type, typical of shorelines of low sediment production rates and high meteorologic tidal range, characterized by tidal channels which rework the flats producing grainstone lenses and beds and shell lags, and prominent storm layers; and a passive type in areas of lower meteorologic tidal range and higher sediment production rates, characterized by an absence of channel deposits, much fenestral and cryptalgal peloidal micrite, few storm layers and possibly extensive mixing-zone dolomite. Fluctuations in sea-level strongly affect platform sedimentation. Shelves are relatively narrow depositional environments, characterized by a distinct break of slope at the shelf margin. Reefs and carbonate sand bodies typify the turbulent shelf margin and give way to a shelf lagoon, bordered by tidal flats and/or a beach-barrier system along the shoreline. Marginal reef complexes show a fore-reef--reef core--back reef facies arrangement, where there were organisms capable of producing a solid framework. There have been seven such phases through the Phanerozoic. Reef mounds, equivalent to modern patch reefs, are very variable in faunal composition, size and shape. They occur at shelf margins, but also within shelf lagoons and on platforms and ramps. Four stages of development can be distinguished, from little-solid reef with much skeletal debris through to an evolved reef-lagoon-debris halo system. Shelf-marginal carbonate sand bodies consist of skeletal and oolite grainstones. Windward, leeward and tide-dominated shelf margins have different types of carbonate sand body, giving distinctive facies models. Ramps slope gently from intertidal to basinal depths, with no major change in gradient. Nearshore, inner ramp carbonate sands of beach-barrier-tidal delta complexes and subtidal shoals give way to muddy sands and sandy muds of the outer ramp. The major depositional processes are seaward progradation of the inner sand belt and storm transport of shoreface sand out to the deep ramp. Most shallow-marine carbonate facies are represented throughout the geologic record. However, variations do occur and these are most clearly seen in shelf-margin facies, through the evolutionary pattern of frame-building organisms causing the erratic development of barrier reef complexes. There have been significant variations in the mineralogy of carbonate skeletons, ooids and syn-sedimentary cements through time, reflecting fluctuations in seawater chemistry, but the effect of these is largely in terms of diagenesis rather than facies

Pile foundation problems in Kuala Lumpur Limestone, Malaysia, 1987,
Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 943
Bergado Dt, Selvanayagam An,
The geology and karstic nature of the Kuala Lumpur (Malaysia) limestone are described in relation to pile foundation problems of heavily loaded structures. The presence of cavities, pinnacles, cantilever slabs, floating slabs and pockets of soft silty clay and loose sand in the underlying limestone bedrock presents formidable challenges to foundation engineers. Other problems include insufficient seating and damage to pile tips due to irregular and sloping bedrock surfaces. There is also the added difficulty of detecting the location and extent of cavities. Empirical design methods and local construction techniques have been successfully used such as: (i) bridging limestone cavities and slabs by filling with concrete, (ii) utilizing numerous small diameter high yield stress piles to distribute the loads and to withstand high driving stresses, (iii) filling cavities with concrete, and (iv) using micropiles to redistribute the loads. Two case histories are presented, consisting of an access ramp and a tall building. In each of these case histories, the soil investigation methods, the pile bearing capacity calculations, the selection of pile types, the pile load tests, the pile driving criteria, and construction problems are outlined and discussed. The pile foundation used consisted of H-section, high yield stress, 355 x 368 mm, driven steel piles with capacities of 750 kN to 1280 kN for the access ramp structures and the same H-section steel piles with pile capacities of 965 kN to 1070 kN for the tall building

Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 943
Lopezgomez J. , Mas R. , Arche A. ,
The Upper Permian-Triassic strata of the SE Iberian Ranges, eastern Spain, display the classic Germanic-type facies of Buntsandstein, Muschelkalk and Keuper. The Muschelkalk is represented by two carbonate units with a siliciclastic-evaporitic unit in between. Their ages range from Anisian to basal Carnian (Middle Triassic to base of the Upper Triassic). The carbonate units represent ramps that evolved during the early thermal subsidence period which succeeded the first rift phase. Seven facies have been distinguished, representing shoals, tidal flats, organic buildups and lagoons, as well as a karst horizon in the lower carbonatic unit. Most of the carbonates were dolomitised. Three processes of dolomitization are invoked: mixing waters, penecontemporaneous seepage refluxion, and deep burial. The top of the Buntsandstein and the Muschelkalk facies are subdivided into two depositional sequences, including lowstand, transgressive and highstand systems tracts, with superimposed tectonic and eustatic controls

Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 943
Elrick M,
Middle Devonian carbonates (250-430 m thick) of the eastern Great Basin were deposited along a low energy, westward-thickening, distally steepened ramp. Four third-order sequences can be correlated across the ramp-to-basin transition and are composed of meter-scale, upward-shallowing carbonate cycles (or parasequences). Peritidal cycles (shallow subtidal facies capped by tidal-flat laminites) constitute 90% of all measured cycles and are present across the entire ramp. The peritidal cycles are regressive- and transgressive-prone (upward-deepening followed by upward-shallowing facies trends). Approximately 80% of the peritidal cycle caps show evidence of prolonged subaerial exposure including sediment-filled dissolution cavities, horizontal to vertical desiccation cracks, rubble and karst breccias, and pedogenic alteration; locally these features are present down to 2 m below the cycle caps. Subtidal cycles (capped by shallow subtidal facies) are present along the middle-outer ramp and ramp margin and indicate incomplete shallowing. submerged subtidal cycles (64% of all subtidal cycles) are composed of deeper subtidal facies overlain by shallow subtidal facies. Exposed subtidal cycles are composed of deeper subtidal facies overlain by shallow subtidal facies that are capped by features indicative of prolonged subaerial exposure (dissolution cavities and brecciation). Average peritidal and subtidal cycle durations are between approximately 50 and 130 k.y. (fourth- to fifth-order). The combined evidence of abundant exposure-capped peritidal and subtidal cycles, transgressive-prone cycles, and subtidal cycles correlative with updip peritidal cycles indicates that the cycles formed in response to fourth- to fifth-order, glacio-eustatic sea-level oscillations. Sea-level oscillations of relatively low magnitude (< 10 m) are suggested by the abundance of peritidal cycles, the lack of widely varying, water-depth-dependent facies within individual cycles, and the presence of noncyclic stratigraphic intervals within intrashelf-basin, slope, and basin facies. Noncyclic intervals represent missed subtidal beats when the seafloor lay too deep to record the effects of the short-term sea-level oscillations. Exposure surfaces at the tops of peritidal and subtidal cycles represent one, or more likely several, missed sea-level oscillations when the platform lay above fluctuating sea level, but the amplitude of fourth- to fifth-order sea-level oscillation(s) were not high enough to flood the ramp. The large number of missed beats (exposure-capped cycles), specifically in Sequences 2 and 4, results in Fischer plots that show poorly developed rising and falling limbs (subdued wave-like patterns); consequently the Fischer plots: are of limited use as a correlation tool for these particular depositional sequences. The abundance of missed beats also explains why Milankovitch-type cycle ratios (similar to 5:1 or similar to 4:1) are not observed and why such ratios would not be expected along many peritidal-cycle-dominated carbonate platforms

Searching for extinction/recovery gradients: the Frasnian-Famennian interval, Mokra Section, Moravia, central Europe, 1996,
Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 943
Cejchan P, Hladil J,
A series of ancient seafloors colonized by diverse organisms has been documented from the Upper Devonian rocks of the Western Mokra Quarry. Situated in the southern tectonic closure of the Moravian Karst, the Frasnian-Famennian shallow carbonate ramps exhibit both Rhenish and Ukrainian affinities. Reconstruction of palaeo-sea floor horizons results in a series of 28 quadrats sufficient for further evaluation. Eighty-five taxa involved were scrutinized for abundance, occupied area, skeletal mass production and biomass production. The aim of the study was to determine whether the observed sequence of quadrats can be distinguished from a random one, and to discover any possible unidimensional gradient as a latent control. Monte Carlo simulations and a graph theoretical approach were utilized. Although the raw data seemed chaotic, the simulations demonstrated the observed sequence is not random. A significant influence of a hidden control is thus suggested. Fifteen characteristics of quadrats (e.g. diversity, number of taxa, vertical stratification of community, number of patches) were utilized for final interpretation. The gradient reconstructed by TSP algorithm reveals a significant crisis within the uppermost part of the Amphipora-bearing limestone

Interprtation morphomtrique et splo_gense : exemple de rseaux karstiques de Basse-Provence (directions de galeries, modle et maillage structural), 1997,
Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 943
Blanc Jeanjoseph, Monteau Raymond
Successive tectonic phases on limestone massifs are at the origin of a fracturation grid with several pattern dimensions, and linear or organized drain directions. Mechanical reactivations are observed from Oligocene until Plio-Quaternary on a former "pyreneo-provenale" structure (Eocene). Statistical analysis of gallery and fracture directions, cave levels and descent stages (overdeepening) show several erosional stages occurring after the formation of the Antevindobonian erosional surface. The active speleogenesis during Oligocene and Miocene was controlled by tectonics in connection with European rifting and mediterranean opening. In Messinian a short and significant lowering of mediterranean base level (and water table) made drastic erosion and created vertical pits. The horizontal cave level dug during the stabilization phase of Pliocene, now perched over underground rivers, shows a new overdeepening because of glacio-eustatic Quaternary oscillations. Compressive or distensive mechanical reactivations (Upper Miocene, Pliocene, Quaternary) modified the drainage and consequently the cave organization: self-piracy, confluence and diffluence. In the endokarst, the drainage inversion can be detected in late Upper continental Miocene and early Messinian (6,5 Ma), in correlation with the tilting and extension of the continental margin. Five caves in Provence are studied: Sabre, Petit Saint-Cassien, Rampins, Planesselve river, and Tete du Cade networks.

Platform-top and ramp deposits of the Tonasa Carbonate Platform, Sulawesi, Indonesia, 1997,
Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 943
Wilson M. E. J. , Bosence D. W. J. ,
This study presents a detailed facies analysis of shallow-water platform and ramp deposits of an extensive Tertiary carbonate platform. Temporal and spatial variations have been used to construct a palaeogeographic reconstruction of the platform and to evaluate controls on carbonate sedimentation The late Eocene to mid-Miocene shallow-water and outer ramp/basinal deposits of the Tonasa Carbonate Platform, from the Pangkajene and Jeneponto areas of South Sulawesi respectively, formed initially as a transgressive sequence in a probable backarc setting. The platform was dominated by foraminifera and had a ramp-type southern margin. Facies belts on the platform trend east-west and their position remained remarkably stable through time indicating aggradation of the platform-top. In comparison outer ramp deposits prograded southwards at intervals into basinal marls. Tectonics, in the form of subsidence, was the dominant control on accommodation space on the Tonasa Carbonate Platform. The location of barriers' and the resultant deflection of cross-platform currents, together with the nature of carbonate producing organisms also affected sedimentation, whilst eustatic or autocyclic effects are difficult to differentiate from the affects of tectonic tilting. Moderate- to high-energy platform top or redeposited carbonate facies may form effective hydrocarbon reservoirs in otherwise tight foraminifera dominated carbonates, which occur widely in SE Asia, and have not been affected by extensive porosity occlusion

Formation of dolomite mottling in Middle Triassic ramp carbonates (Southern Hungary), 2000,
Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 943
Torok A. ,
The Middle Triassic carbonates of the Villany Mountains were deposited on a homoclinal carbonate ramp. Many of the carbonates from the 700 m-thick sequence show partial or complete dolomitization. The present paper describes dolomites that occur in a limestone unit as irregular mottles and as pore- and fracture-filling cements. Replacement-type scattered dolomite rhombs in the mottles having inclusion-rich, very dull luminescent cores and limpid non-luminescent outer zones represent the initial phase of dolomitization. The isotopic composition of these dolomites (delta(13)C = .30 parts per thousand VPDB, delta(18)O = -3.60 parts per thousand VPDB) is similar to that of the calcitic micrite (delta(13)C = .6 parts per thousand VPDB, delta(18)O = -4.00 parts per thousand VPDB) indicating that no external fluids were introduced during dolomite formation. The elevated Sr content of the micrites implies that sediment was originally aragonite or high-Mg calcite. Dolomitization took place in the burial realm from a 'marine' pore-fluid in a partly closed system. Later fracture-related saddle dolomite reflects elevated formation temperatures and increasing burial. Five calcites were identified. Multiple generations of calcite-filled fractures were formed during burial diagenesis generally having dull or no luminescence (delta(13)C = .80 parts per thousand VPDB, delta(18)O = -6.40 parts per thousand VPDB). The latest phase calcites are related to karst formation, having a very negative isotopic composition (delta(13)C = -5.0 to -7.2 parts per thousand VPDB and delta(18)O approximate to -7.44 parts per thousand VPDB). The karst-related processes include dissolution, calcite precipitation and partial replacement of dolomites by complex zoned bright yellow calcite. The timing of dolomitization is uncertain, but the first phase took place in a partly closed system prior to stylolite formation. Late-stage saddle dolomites were precipitated during maximum burial in the Cretaceous. The dissolution of dolomites and karst-related calcite replacement was not earlier than Late Cretaceous. (C) 2000 Elsevier Science B.V. All rights reserved

Sequence stratigraphy of the type Dinantian of Belgium and its correlation with northern France (Boulonnais, Avesnois), 2001,
Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 943
Hance L. , Poty E. , Devuyst F. X. ,
The relative influences of local tectonics and global eustasy in the architecture of the sedimentary units of the Namur-Dinant Basin (southern Belgium) are determined. Nine third-order sequences are recognised. During the Lower Tournaisian (Hastarian and lower Ivorian) a homoclinal ramp extended from southern Belgium through southern England (Mendips) and into southern Ireland. From the upper Ivorian to the lower Visean rapid facies changes occurred due to progradation and increasing prominence of Waulsortian mudmounds. Progradation gradually produced a situation in which inner shelf facies covered the Namur (NSA), Condroz (CSA) and southern Avesnes (ASA) sedimentation areas, whereas outer shelf facies were restricted to the Dinant sedimentation area (DSA). During the middle and late Viscan a broad shelf was established from western Germany to southern Ireland. Because the shelf built up mainly by aggradation, parasequences can be followed over a large area. An early phase of Variscan shortening is perceptible during the Livian. The stratigraphic gap between the first Namurian sediments (E2 Goniatite Zone) and the underlying Visean varies from place to place, but is more important in the north. Sequence 1 straddles the Devonian-Carboniferous boundary. It starts with a transgressive system tract (TST) corresponding to the Etroeungt Formation (Fm.) and its lateral equivalent (the upper part of the Comb lain-au-Pont Fin.), and to the lower member of the Hastiere Fin. The highstand system tract (HST) is represented by the middle member of the Hastiere Fin. which directly overlies Famennian silicielastics in the northern part of the NSA. Sequence 2 starts abruptly, in the DSA and CSA, with the upper member of the Hastiere Fin. as the TST. The maximum flooding surface (MFS) lies within the shales of the Pont d'Arcole Fin., whereas the thick-bedded crinoidal limestones of the Landelies Fm. form the HST. Sequence 3 can clearly be recognised in the DSA and CSA. Its TST is formed by the Maurenne Fm. and the Yvoir Fm. in the northern part of the DSA and by the Maurenne Fm. and the Bayard Fin. in the southern part of the DSA. The Ourthe Fin. represents the HST. Growth of the Waulsortian mudmounds started during the TST. Sequence 4 shows a significant change of architecture. The TST is represented by the Martinrive Fm. in the CSA and the lower part of the Leffe Fin. in the DSA. The HST is marked by the crinoidal rudstones of the Flemalle Member (Mbr.) and the overlying oolitic limestones of the Avins Mbr. (respectively lower and upper parts of the Longpre Fin.). These latter units prograded far southwards, producing a clinoform profile. Sequence 5 is only present in the DSA and in the Vise sedimentation area (VSA). The TST and the HST form most of the Sovet Fm. and its equivalents to the south, namely, the upper part of the Leffe Fm. and the overlying Molignee Fm. In the VSA, the HST is locally represented by massive grainstones. Sequence 6 filled the topographic irregularities inherited from previous sedimentation. In the CSA, NSA and ASA the TST is formed by the peritidal limestones of the Terwagne Fm. which rests abruptly on the underlying Avins Nibr. (sequence 4) with local karst development. In the DSA, the TST corresponds to the Salet Fin. and, further south, to the black limestones of the strongly diachronous Molignee Fin. Over the whole Namur-Dinant Basin, the sequence ends with the thick-bedded packstones and grainstones of the Neffe Frn. as the HST. Sequence 7 includes the Lives Fm. and the lower part of the Grands-Malades Fm. (Seilles Mbr. and its lateral equivalents), corresponding respectively to the TST and HST. Sequence 8 corresponds to the Bay-Bonnet Mbr. (TST), characterised by stromatolitic limestones. The HST corresponds to the Thon-Samson Mbr. Sequence 9 is the youngest sequence of the Belgian Dinantian in the CSA and DSA. It includes the Poilvache Nibr. (TST, Bonne Fm.) and the Anhee Fm. (HST). These units are composed of shallowing-upward parasequences. The uppermost Visean and basal Namurian are lacking in southern Belgium where sequence 9 is directly capped by Namurian E2 silicielastics. In the VSA, sequence 9 is well developed

Late Archaean foreland basin deposits, Belingwe greenstone belt, Zimbabwe, 2001,
Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 943
Hofmann A. , Dirks P. H. G. M. , Jelsma H. A. ,
The c. 2.65 Ga old sedimentary Cheshire Formation of the Belingwe greenstone belt (BDB), central Zimbabwe, has been studied in detail for the first time to shed some light on the much debated evolution of this classical belt. The Cheshire Formation rests sharply on a mafic volcanic unit (Zeederbergs Formation) and comprises a basal, eastward-sloping carbonate ramp sequence built of shallowing-upward, metre-scale sedimentary cycles. The cycles strongly resemble Proterozoic and Phanerozoic carbonate cycles and might have formed by small-scale eustatic sea level changes. The top of the carbonate ramp is represented by a karst surface. The carbonates are overlain by and grade laterally to the east into deeper water (sub-wave base) siliciclastic facies. Conglomerate, shale and minor sandstone were deposited by high- to low-density turbidity currents and were derived from the erosion of Zeederbergs-like volcanic rocks from the east. Shortly after deposition, the Cheshire Formation and underlying volcanics were affected by a northwest-directed thrusting event. Thrusting gave rise to the deformation of semi-consolidated sediments and resulted in the juxtaposition of a thrust slice of Zeederbergs basalts onto Cheshire sediments. The stratigraphy, asymmetric facies and sediment thickness distribution, palaeogeographic constraints and evidence for an early horizontal tectonic event suggest that the Cheshire Formation formed in a foreland-type sedimentary basin. (C) 2001 Elsevier Science B.V. All rights reserved

Genesis of the Dogankuzu and Mortas Bauxite Deposits, Taurides, Turkey: Separation of Al, Fe, and Mn and Implications for Passive Margin Metallogeny, 2002,
Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 943
Ozturk Huseyin, Hein James R. , Hanilci Nurullah,
The Taurides region of Turkey is host to a number of important bauxite, Al-rich laterite, and Mn deposits. The most important bauxite deposits, Do[g]ankuzu and Morta[s], are karst-related, unconformity-type deposits in Upper Cretaceous limestone. The bottom contact of the bauxite ore is undulatory, and bauxite fills depressions and sinkholes in the footwall limestone, whereas its top surface is concordant with the hanging-wall limestone. The thickness of the bauxite varies from 1 to 40 m and consists of bohmite, hematite, pyrite, marcasite, anatase, diaspore, gypsum, kaolinite, and smectite. The strata-bound, sulfide- and sulfate-bearing, low-grade lower part of the bauxite ore bed contains pyrite pseudomorphs after hematite and is deep red in outcrop owing to supergene oxidation. The lower part of the bauxite body contains local intercalations of calcareous conglomerate that formed in fault-controlled depressions and sinkholes. Bauxite ore is overlain by fine-grained Fe sulfide-bearing and calcareous claystone and argillaceous limestone, which are in turn overlain by massive, compact limestone of Santonian age. That 50-m-thick limestone is in turn overlain by well-bedded bioclastic limestone of Campanian or Maastrichtian age, rich with rudist fossils. Fracture fillings in the bauxite orebody are up to 1 m thick and consist of bluish-gray-green pyrite and marcasite (20%) with bohmite, diaspore, and anatase. These sulfide veins crosscut and offset the strata-bound sulfide zones. Sulfur for the sulfides was derived from the bacterial reduction of seawater sulfate, and Fe was derived from alteration of oxides in the bauxite. Iron sulfides do not occur within either the immediately underlying or overlying limestone. The platform limestone and shale that host the bauxite deposits formed at a passive margin of the Tethys Ocean. Extensive vegetation developed on land as the result of a humid climate, thereby creating thick and acidic soils and enhancing the transport of large amounts of organic matter to the ocean. Alteration of the organic matter provided CO2 that contributed to formation of a relatively 12C-rich marine footwall limestone. Relative sea-level fall resulted from strike-slip faulting associated with closure of the ocean and local uplift of the passive margin. That uplift resulted in karstification and bauxite formation in topographic lows, as represented by the Do[g]ankuzu and Morta[s] deposits. During stage 1 of bauxite formation, Al, Fe, Mn, and Ti were mobilized from deeply weathered aluminosilicate parent rock under acidic conditions and accumulated as hydroxides at the limestone surface owing to an increase in pH. During stage 2, Al, Fe, and Ti oxides and clays from the incipient bauxite (bauxitic soil) were transported as detrital phases and accumulated in the fault-controlled depressions and sinkholes. During stage 3, the bauxitic material was concentrated by repeated desilicification, which resulted in the transport of Si and Mn to the ocean through a well-developed karst drainage system. The transported Mn was deposited in offshore muds as Mn carbonates. The sulfides also formed in stage 3 during early diagenesis. Transgression into the foreland basin resulted from shortening of the ocean basin and nappe emplacement during the latest Cretaceous. During that time bioclastic limestone was deposited on the nappe ramp, which overlapped bauxite accumulation

Unraveling the Origin of Carbonate Platform Cyclothems in the Upper Triassic Durrenstein Formation (Dolomites, Italy), 2003,
Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 943
Preto Nereo, Hinnov Linda A. ,
Facies analysis of the Durrenstein Formation, central-eastern Dolomites, northern Italy, indicates that this unit was deposited on a carbonate ramp, as evidenced by the lack of a shelf break, slope facies, or a reef margin, together with the occurrence of a 'molechfor' biological association. Its deposition following the accumulation of rimmed carbonate platforms during the Ladinian and Early Carnian marks a major shift in growth mode of the Triassic shallow marine carbonates in the Dolomites. The Durrenstein Formation is characterized by a hierarchical cyclicity, with elements strongly suggestive of an allocyclic origin, including (a) subaerial exposure features directly above subtidal facies within meter-scale cyclothems, (b) purely subtidal carbonate cyclothems, (c) symmetric peritidal carbonate cyclothems, and (d) continuity of cyclothems of different orders through facies boundaries. The Durrenstein cyclothems are usually defined by transgressive and regressive successions, and so most of them probably originated from sea-level oscillations. Their allocyclic origin allows their use for high-resolution correlations over distances up to 30 km. A stratigraphic section in the Tre Cime di Lavaredo area, encompassing the upper part of the Durrenstein Formation and the lower part of the overlying Raibl Formation (Upper Carnian) was studied using time-frequency analysis. A strong Milankovitch signal appeared when interference arising from a variable sedimentation rate was estimated and removed by tuning the short precession line in a spectrogram. All of the principal periodicities related to the precession index and eccentricity, calculated for 220 Ma, are present: P1 (21.9 ky); P2 (17.8 ky); E1 (400 ky), E2 (95 ky), and E3 (125 ky), along with a peak at a frequency double that of the precession, which is a predicted feature of orbitally forced insolation at the equator. Components possibly related to Earth's obliquity at ca. 35 ky and ca. 46 ky are present as well. The recovery of Milankovitch periodicities allows reconstruction of a high-resolution timescale that is in good agreement with published durations of the Carnian based on radiometric ages. The recognition of a Milankovitch signal in the Durrenstein and lower Raibl formations, as well as in other Mesozoic carbonate platforms, strongly supports a deterministic and predictable--rather than stochastic--control on the formation of carbonate platforms. Carbonate platforms might thus be used in the future for the construction of an astronomical time scale for the Mesozoic

Lower carboniferous (late Visean) platform development and cyclicity in southern Ireland: Foraminiferal biofacies and lithofacies evidence, 2003,
Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 943
Gallagher Sj, Somerville Id,
The stratigraphy of several well exposed late Visean carbonate successions in southern Ireland have been correlated using high resolution foraminiferal/algal biostratigraphy and detailed biofacies analysis. This study has revealed that during the lower late Visean (early Asbian) time platform mudbank and intrabank facies were deposited on a rimmed ramp that dipped southward. By upper late Visean (late Asbian to Brigantian) time, well bedded carbonates were deposited on a shallow, unrimmed platform expanse that prograded southward through a series of shallowing-upward minor cycles. Within the late Asbian successions numerous minor cycles (2-15 m thick) occur that contain distinctive lithofacies and three distinct foraminiferal biofacies. The top of these cycles can usually be identified by palaeokarst surfaces with relief of to 0.5 m associated with pedogenic features and fissures indicating initial palaeocave-forming processes. Deposits on these emergent boundary surfaces include thick palaeosols (up to I in thick) and eroded boulders of the underlying karst surfaces. The lower transgressive facies of each minor cycle often began with the deposition of shallow-water, subtidal, algal-rich limestone containing diverse foraminiferal biofacies (Biofacies type 2). New foraminiferal taxa may appear in this part of the cycle. Towards the middle part of each cycle deeper water, subtidal, foraminiferal biofacies occur, but with no significant first appearance data. The biofacies at this level in the cycle are often algal-poor limestone rich in bryozoans or crinoids (Biofacies type 1). Biostratigraphically important foraminiferal taxa often first appear or reappear in low diversity assemblages toward the top of most cycles in shallower water grainstone microfacies (Biofacies type 3) rich in dasycladacean algae

A mineralogical and phytolith study of the middle stone age hearths in Sibudu Cave, KwaZulu-Natal, South Africa, 2004,
Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 943
Schiegl S. , Stockhammer P. , Scott C. , Wadley L. ,
Sediments from Middle Stone Age hearths and burnt deposits in Sibudu Cave (KwaZulu-Natal, South Africa) were analysed for their mineral and phytolith contents. The mineral compositions were determined by FT-IR spectroscopy. The phytoliths were classified and counted by transmitted polarized light microscopy. Burning experiments using wood and grasses from species native to the cave's environment yielded the reference ashes. The visible hearths and ash dumps contain phytolith assemblages characteristic of wood fuel. A significant portion of the phytoliths of hearths and ash layers display morphologies related to intense heating. This finding is suggestive of long-burning wood fires and/or reuse of the same fireplace. The heat-altered phytoliths are useful in tracing fires, especially if hearth structures are not preserved and ash deposits have been diagenetically and heavily altered. The phytolith contents and mineralogical composition of the ash deposits and the surrounding sedimentary matrix are very similar. This feature suggests that the sedimentary matrix originally contained fireplaces and ash deposits, whose structures were destroyed shortly after deposition, presumably by trampling.(21) The intact circular hearths are most likely the product of intense fires. Similar results from hearths and their surrounding matrix have been reported from Middle Palaeolithic cave sites in Israel

Evolution of the Adriatic carbonate platform: Palaeogeography, main events and depositional dynamics, 2005,
Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/isthin5/public_html/addon-domains/ on line 943
Vlahovic I. , Tisljar J. , Velic I. , Maticec D. ,
The Adriatic Carbonate Platform (AdCP) is one of the largest Mesozoic carbonate platforms of the Perimediterranean region. Its deposits comprise a major part of the entire carbonate succession of the Croatian Karst (External or Outer) Dinarides, which is very thick (in places more than 8000 m), and ranges in age from the Middle Permian (or even Upper Carboniferous) to the Eocene. However, only deposits ranging from the top of the Lower Jurassic (Toarcian) to the top of the Cretaceous can be attributed to the AdCP (defined as an isolated palaeogeographical entity). Although the entire carbonate succession of the Karst Dinarides was deposited within carbonate platform environments, there were different types of carbonate platforms located in different palaeogeographical settings. Carboniferous to Middle Triassic mixed siliciclastic-carbonate deposits were accumulated along the Gondwanian margin, on a spacious epeiric carbonate platform. After tectonic activity, culminating by regional Middle Triassic volcanism recorded throughout Adria (the African promontory), a huge isolated carbonate Southern Tethyan Megaplatform (abbreviated as STM) was formed, with the area of the future AdCP located in its inner part. Tectonic disintegration of the Megaplatform during the middle to late Early Jurassic resulted in the establishment of several carbonate platforms (including the Adriatic, Apenninic and Apulian) separated by newly drowned deeper marine areas (including the Adriatic Basin as a connection between the Ionian and Belluno basins, Lagonero, Basin, and the area of the Slovenian and Bosnian troughs). The AdCP was characterised by predominantly shallow-marine deposition, although short or long periods of emergence were numerous, as a consequence of the interaction of synsedimentary tectonics and eustatic changes. Also, several events of temporary platform drowning were recorded, especially in the Late Cretaceous, when synsedimentary tectonics became stronger, leading up to the final disintegration of the AdCP. The thickness of deposits formed during the 125 My of the AdCP's existence is variable (between 3500 and 5000 m). The end of AdCP deposition was marked by regional emergence between the Cretaceous and the Palaeogene. Deposition during the Palaeogene was mainly controlled by intense synsedimentary tectonic deformation of the former platform area-some carbonates (mostly Eocene in age) were deposited on irregular ramp type carbonate platforms surrounding newly formed flysch basins, and the final uplift of the Dinarides reached its maximum in the Oligocene/Miocene. The Adriatic Carbonate Platform represents a part (although a relatively large and well-preserved one) of the broader shallow-water carbonate platform that extended from NE Italy to Turkey (although its continuity is somewhat debatable in the area near Albanian/Greece boundary). This large carbonate body, which was deformed mostly in the Cenozoic (including a significant reduction of its width), needs a specific name, and the Central Mediterranean Carbonate Platform is proposed (abbreviated to CMCP), although the local names (such as AdCP for its NW part) should be kept to enable easier communication, and to facilitate description of local differences in platform evolution,

Results 1 to 15 of 19
You probably didn't submit anything to search for