MWH Global

Enviroscan Ukrainian Institute of Speleology and Karstology

Community news

Speleology in Kazakhstan

Shakalov on 04 Jul, 2018
Hello everyone!   I pleased to invite you to the official site of Central Asian Karstic-Speleological commission ("Kaspeko")   There, we regularly publish reports about our expeditions, articles and reports on speleotopics, lecture course for instructors, photos etc. ...

New publications on hypogene speleogenesis

Klimchouk on 26 Mar, 2012
Dear Colleagues, This is to draw your attention to several recent publications added to KarstBase, relevant to hypogenic karst/speleogenesis: Corrosion of limestone tablets in sulfidic ground-water: measurements and speleogenetic implications Galdenzi,

The deepest terrestrial animal

Klimchouk on 23 Feb, 2012
A recent publication of Spanish researchers describes the biology of Krubera Cave, including the deepest terrestrial animal ever found: Jordana, Rafael; Baquero, Enrique; Reboleira, Sofía and Sendra, Alberto. ...

Caves - landscapes without light

akop on 05 Feb, 2012
Exhibition dedicated to caves is taking place in the Vienna Natural History Museum   The exhibition at the Natural History Museum presents the surprising variety of caves and cave formations such as stalactites and various crystals. ...

Did you know?

That cave formations is 1. secondary mineral deposits formed by the accumulation, dripping, or flowing of water in a cave [10]. 2. unsatisfactory term used to include all varieties of calcite, gypsum and other, rarer, mineral cave deposits; therefore a synonym for the equally unwieldly speleothem or the colloquial term 'stall' [9]. see also sinter; speleothem.?

Checkout all 2699 terms in the KarstBase Glossary of Karst and Cave Terms

What is Karstbase?

Search KARSTBASE:

keyword
author

Browse Speleogenesis Issues:

KarstBase a bibliography database in karst and cave science.

Featured articles from Cave & Karst Science Journals
Chemistry and Karst, White, William B.
See all featured articles
Featured articles from other Geoscience Journals
Karst environment, Culver D.C.
Mushroom Speleothems: Stromatolites That Formed in the Absence of Phototrophs, Bontognali, Tomaso R.R.; D’Angeli Ilenia M.; Tisato, Nicola; Vasconcelos, Crisogono; Bernasconi, Stefano M.; Gonzales, Esteban R. G.; De Waele, Jo
Calculating flux to predict future cave radon concentrations, Rowberry, Matt; Marti, Xavi; Frontera, Carlos; Van De Wiel, Marco; Briestensky, Milos
Microbial mediation of complex subterranean mineral structures, Tirato, Nicola; Torriano, Stefano F.F;, Monteux, Sylvain; Sauro, Francesco; De Waele, Jo; Lavagna, Maria Luisa; D’Angeli, Ilenia Maria; Chailloux, Daniel; Renda, Michel; Eglinton, Timothy I.; Bontognali, Tomaso Renzo Rezio
Evidence of a plate-wide tectonic pressure pulse provided by extensometric monitoring in the Balkan Mountains (Bulgaria), Briestensky, Milos; Rowberry, Matt; Stemberk, Josef; Stefanov, Petar; Vozar, Jozef; Sebela, Stanka; Petro, Lubomir; Bella, Pavel; Gaal, Ludovit; Ormukov, Cholponbek;
See all featured articles from other geoscience journals

Search in KarstBase

Your search for scales (Keyword) returned 116 results for the whole karstbase:
Showing 16 to 30 of 116
Linear and nonlinear input/output models for karstic springflow and flood prediction at different time scales, 1999, Labat D. , Ababou R. , Mangin A. ,
Karstic formations function as three-dimensional (3D) hydrological basins, with both surface and subsurface flows through fissures, natural conduits, underground streams and reservoirs. The main characteristic of karstic formations is their significant 3D physical heterogeneity at all scales, from fine fissuration to large holes and conduits. This leads to dynamic and temporal variability, e.g, highly variable flow rates, due to several concurrent flow regimes with several distinct response times. The temporal hydrologic response of karstic basins is studied here from an input/output, systems analysis viewpoint. The hydraulic behaviour of the basins is approached via the relationship between hydrometeorological inputs and outputs. These processes are represented and modeled as random, self-correlated and cross-correlated, stationary time processes. More precisely, for each site-specific case presented here, the input process is the total rainfall on the basin and the output process is the discharge rate at the outlet of the basin (karstic spring). In the absence of other data, these time processes embody all the available information concerning a given karstic basin. In this paper, we first present a brief discussion of the physical structure of karstic systems. Then, we formulate linear and nonlinear models, i.e. functional relations between rainfall and runoff, and methods for identifying the kernel and coefficients of the functionals (deterministic vs. statistical; error minimisation vs. polynomial projection). These are based mostly on Volterra first order (linear) or second order (nonlinear) convolution. In addition, a new nonlinear threshold model is developed, based on the frequency distribution of interannual mean daily runoff. Finally, the different models and identification methods are applied to two karstic watersheds in the french Pyrenees mountains, using long sequences of rainfall and spring outflow data at two different sampling rates (daily and semi-hourly). The accuracy of nonlinear and linear rainfall-runoff models is tested at three time scales: long interannual scale (20 years of daily data), medium or seasonal scale (3 months of semi-hourly data), and short scale or 'flood scale' (2 days of semi-hourly data). The model predictions are analysed in terms of global statistical accuracy and in terms of accuracy with respect to high flow events (floods)

Entranceless and fractal caves revisited, 1999, Curl R. L.
Cave geometric properties have been studied between 1958 and today as statistical or fractal objectsThese studies have divulged some degree of order in such properties as the distribution of cave lengths in a region and the distribution of cave passage sizes, and exhibiting some degree of self-similarity, suggesting a fractal nature, or moderate departures from self-similarity, suggesting geological mechanisms that introduce particular scalesThe studies have also produced methods for estimating roughly the number of entranceless caves and the length distribution of all caves in regions, and the volume of caves as a function of the size of cave passages, first steps in a more complete description of karst aquifers

Perspectives in karst hydrogeology and cavern genesis, 1999, Ford D. C.
Hydrogeology and speleology both began during the 19th CenturyTheir approaches to limestone aquifers diverged because hydrogeologists tend to measure phenomena at very local scales between drilled wells and generalize from them to basin scales, while speleologists study the large but sparse conduits and then infer conditions around themConvergence of the two approaches with modem computing should yield important genetic models of aquifer and caveGenesis of common cave systems by dissolution is a three-dimensional problem, best broken down into two-dimensional pairs for purposes of analysisHistorically, the dimensions of length and depth have received most attention, especially the question of the location of principal cave genesis with respect to the water tableBetween 1900 and 1950, different scientists proposed that caves develop principally (1) in the vadose zone; (2) at random depth in the phreatic zone; (3) along the water table in betweenEmpirical evidence suggests that these differing hypotheses can be reconciled by a four-state model in which the frequency of penetrable fissuration controls the system geometryFor the dimensions of length and breadth (plan patterns) there is widespread agreement that dendritic (or branchwork) patterns predominate in common cavesIrregular networks or anastomose patterns may occur as subsidiary componentsWhen hydraulic conditions in a fissure are anisotropic (the usual case), dissolutional conduit development is competitive: local hydraulic gradients are reoriented toward the first conduits to break through to outlet points, redirecting others toward them in a cascading processPlan patterns are most complex where there have been multiple phases ("levels") of development in a cave system in response to such effects as river channel entrenchment lowering the elevation of springs

Bridging the gap between real and mathematically simulated karst aquifers, 1999, Groves C. , Meiman J. , Howard A. D.
Although several numerical codes have been developed to study the patterns of karst aquifer evolution and behavior, in the current generation of models simplifying assumptions must be made because of incomplete quantitative understanding of key processesA one-year, high-temporal-resolution study of carbonate chemistry with Mammoth Cave's Logsdon River, designed to investigate details of these processes, reveals that limestone dissolution rates vary appreciably over storm and seasonal time scales due to variations in the flux of CO2-rich waters that wash through, and flood, conduits during storm eventsThis undersaturated storm water dissolves rock within a flood zone 25-30 m thickThrough the year, waters were undersaturated only 31% of the timeTime scales of actual karst development may thus be impacted by time-varying processes different from the constant-input chemistry assumed in current published numerical codesA dual approach, coupling quantitative modeling and refinement of the models by careful measurement of processes within real karst aquifers, provides a framework for developing a comprehensive understanding of karst system behavior

Interpreting flow using permeability at multiple scales, 1999, Halihan T. , Sharp Jr. J. M. , Mace R. E.
Two difficulties that karst aquifers can present are permeability that varies with the scale of measurement (up to nine orders of magnitude), and permeability that is so high that standard pump tests obtain no measurable drawdownThough it is difficult to quantify, permeability is the most sensitive parameter for either laminar or turbulent groundwater equations and must be accurately estimatedPermeability data at the small-scale (laboratory and outcrop) were used to reproduce permeabilities measured at the well- and regional-scales in the San Antonio segment of the Edwards aquiferThese calculations provided an understanding of how features observed at the small-scale affect permeability measurements at larger scalesConversely, these calculations can be performed on the well- and regional-scale to estimate what small-scale features are influencing the aquiferIn this paper, equations and techniques are presented to help answer questions such as: (1) How can small-scale data be combined to determine an effective well- or regional-scale permeability? (2) What size high-permeability features are influencing an aquifer on the well- or regional-scale? (3) Is the flow in an aquifer Darcian? (4) What velocities should be expected in an aquifer?

Why and how are caves "organized": does the past offer a key to the present, 1999, Lowe, David J.

Many caves within carbonate (and perhaps other) rock sequences display marked spatial organization, particularly a tendency to group within vertical clusters. Most past explanations of clustering involve "recent" effects and interactions. New ideas, based on study of "denuded" or "unroofed" caves, acknowledge but re-interpret features and relationships that were observed long ago and commonly dismissed as "atypical", "irrelevant" or "impossible". Some traditional explanations of vertical clustering must now be re-assessed. Assumptions that any stratigraphical (bedding plane) or joint/fault fissure in carbonate rock provides (or provided) a de facto route for fluid transfer, and hence a focus for void development, are not confirmed by observation. Primitive pre-cave, but potentially cavernous, carbonate masses are not inevitably active hydrologically; nor are they geologically homogeneous. New evidence, and re-evaluation of earlier observations, implies that dissolutional void "inception" is related to a minor subset of all stratigraphical partings, which dominate initially, imprinting incipient guidance for later cave development. Recognition of this fundamental role provides a possible key to understanding the organization of cave systems and necessitates acceptance of an expansion of speleogenetic timescales back to the time of diagenesis.


Role of stratigraphic elements in speleogenesis: the speleoinception concept, 2000, Lowe D. J.
Inception, the earliest phase of cave development, may begin during diagenesis. Within sedimentary rock sequences inception is generally related to specific favorable horizons or zones within the rock mass. These relatively thin inception horizons tend to display atypical chemical and/or physical properties, compared to the primary properties of the bulk of potentially cavernous rock successions. Commonly they correspond to depositional breaks or interruptions, particularly boundaries between major depositional cycles. Thus, according to the Inception Horizon Hypothesis, inception in sedimentary sequences (as typified by carbonate rocks) is inevitably related to, and guided by, thin relatively impure layers within thicker, otherwise pure beds, or at boundaries between impure and pure lithologies. Growth of incipient voids occurs potentially across the full lateral extent of inception horizons, generally very slowly during extended timescales. Growth may progress simultaneously at more than one stratigraphic level in a sequence, in deeply buried, confined or artesian conditions. Voids along individual inception horizons can be linked hydrologically by others that form concurrently or subsequently along tectonic or lithogenetic fissures. Later, interference between the imprinted inception framework and evolving surface landscapes leads to structurally advantageous elements of the potential three dimensional network being selected, linked and enlarged to form the skeletons of developing cave systems.

Speleogenesis: Evolution of Karst Aquifers., 2000,
The aim of this book is to present advances made in recent decades in our understanding of the formation of dissolutional caves, and to illustrate the role of cave genetic ( speleogenetic ) processes in the development of karst aquifers. From the perspective of hydrogeology, karst ground water flow is a distinct kind of fluid circulation system, one that is capable of self-organization and self-development due to its capacity to dissolve significant amounts of the host rock and transport them out of the system. Fluid circulation in soluble rocks becomes more efficiently organized by creating, enlarging and modifying patterns of cave conduits, the process of speleogenesis. We can assert that karst ground water flow is a function of speleogenesis and vice versa . The advances in cave science are poorly appreciated in what may be termed ?mainstream hydrogeology?, which retains a child-like faith in flow models developed in the sand box. Many karst students also will not be aware of all emerging concepts of cave origin because discussions of them are scattered through journals and books in different disciplines and languages, including publications with small circulation. An understanding of principles of speleogenesis and its most important controls is indispensable for proper comprehension of the evolution of the karst system in general and of karst aquifers in particular. We hope this book will be useful for both karst and cave scientists, and for general hydrogeologists dealing with karst terranes. This book is a pioneer attempt by an international group of cave scientists to summarize modern knowledge about cave origin in various settings, and to examine the variety of approaches that have been adopted. Selected contributions from 44 authors in 15 nations are combined in an integrated volume, prepared between 1994 and 1998 as an initiative of the Commission of Karst Hydrogeology and Speleogenesis, International Speleological Union. Despite a desire to produce an integrated book, rather than a mere collection of papers, the editors' policy has not been directed toward unifying all views. Along with some well-established theories and approaches, the book contains new concepts and ideas emerging in recent years. We hope that this approach will stimulate further development and exchange of ideas in cave studies and karst hydrogeology. Following this Introduction, (Part 1), the book is organized in seven different parts, each with sub-chapters. Part 2 gives a history of speleogenetic studies, tracing the development of the most important ideas from previous centuries (Shaw, Chapter 2.1) through the early modern period in the first half of this century (Lowe, Chapter 2.2) to the threshold of modern times (W.White, Chapter 2.3). The present state of the art is best illustrated by the entire content of this book. Part 3 overviews the principal geologic and hydrogeologic variables that either control or significantly influence the differing styles of cave development that are found. In Chapter 3.1 Klimchouk and Ford introduce an evolutionary approach to the typology of karst settings, which is a taken as a base line for the book. Extrinsic factors and intrinsic mechanisms of cave development change regularly and substantially during the general cycle of geological evolution of a soluble rock and , more specifically, within the hydrogeologic cycle. The evolutionary typology of karst presented in this chapter considers the entire life cycle of a soluble formation, from deposition (syngenetic karst) through deep burial, to exposure and denudation. It helps to differentiate between karst types which may concurrently represent different stages of karst development, and is also a means of adequately classifying speleogenetic settings. The different types of karst are marked by characteristic associations of the structural prerequisites for groundwater flow and speleogenesis, flow regime, recharge mode and recharge/discharge configurations, groundwater chemistry and degree of inheritance from earlier conditions. Consequently, these associations make a convenient basis to view both the factors that control cave genesis and the particular types of caves. Lithological and structural controls of speleogenesis are reviewed in general terms in Chapters 3.2 (Klimchouk and Ford). Lowe in Chapter 3.3 discusses the role of stratigraphic elements and the speleo-inception concept. Palmer in Chapter 3.4 overviews the hydrogeologic controls of cave patterns and demonstrates that hydrogeologic factors, the recharge mode and type of flow in particular, impose the most powerful controls on the formation of the gross geometry of cave systems. Hence, analysis of cave patterns is especially useful in the reconstruction of environments from paleokarst and in the prediction and interpretation of groundwater flow patterns and contaminant migration. Any opportunity to relate cave patterns to the nature of their host aquifers will assist in these applied studies as well. Osborne (Chapter 3.7) examines the significance of paleokarst in speleogenesis. More specific issues are treated by Klimchouk (The nature of epikarst and its role in vadose speleogenesis, Chapter 3.5) and by V.Dublyansky and Y.Dublyansky (The role of condensation processes, Chapter 3.6). Part 4 outlines the fundamental physics and chemistry of the speleogenetic processes (Chapter 4.1) and presents a variety of different approaches to modeling cave conduit development (Chapter 4.2). In Chapter 4.1, the chemical reactions during the dissolution of the common soluble minerals, calcite, gypsum, salt and quartz, are discussed with the basic physical and chemical mechanisms that determine their dissolution rates. As limestone is the most common karst rock and its dissolution is the most complex in many respects, it receives the greatest attention. Dreybrodt (Section 4.1.1) and Dreybrodt and Eisenlohr (Section 4.1.2) provide advanced discussion and report the most recent experimental data, which are used to obtain realistic dissolution rates for a variety of hydrogeologic conditions and as input for modeling the evolution of conduits. Although direct comparisons between theoretical or analytical dissolution rates and those derived from field measurements is difficult, a very useful comparison is provided by W.White (Section 4.1.3). The bulk removal of carbonate rock from karst drainage basins can be evaluated either by direct measurement of rock surface retreat or by mass balance within known drainage basins. All of these approaches make sense and give roughly accurate results that are consistent with theoretical expectations. It is well recognized today that the earliest, incipient, phases of speleogenesis are crucial in building up the pattern of conduits that evolve into explorable cave systems. It is difficult to establish the major controls on these initial stages by purely analytical or intuitive methods, so that modeling becomes particularly important. Various approaches are presented in Chapter 4.2. Ford, Ewers and Lauritzen present the results of systematic study of the propagation of conduits between input and output points in an anisotropic fissure, using a variety of hardware and software models, in series representing the "single input", "multiple inputs in one rank", and "multiple inputs in multiple ranks" cases (Section 4.2.1). The results indicate important details of the competitive development of proto-conduits and help to explain branching cave patterns. In the competition between inputs, some principal tubes in near ranks first link ("breakthrough") to an output boundary. This re-orients the flowfields of failed nearby competitors, which then extend to join the principal via their closest secondaries. The process extends outwards and to the rear, linking up all inputs in a "cascading system". The exploding growth of computer capability during the last two decades has greatly enhanced possibilities for digital modeling of early conduit development. Investigating the growth of a single conduit is a logical first step in understanding the evolution of caves, realized here by Dreybrodt and Gabrov?ek in the form of a simple mathematical model (Section 4.2.2) and by Palmer by numerical finite-difference modeling (Section 4.2.3). The models show that positive feedback loops operate; widening a fracture causes increasing flow through it, therefore dissolution rates increase along it and so on, until finally a dramatic increase of flow rates permits a dramatic enhancement of the widening. This breakthrough event terminates the initial stage of conduit evolution. From then on the water is able to pass through the entire conduit while maintaining sufficient undersaturation to preserve low-order kinetics, so the growth rate is very rapid, at least from a geological standpoint -- usually about 0.001-0.1 cm/yr. The initiation ("breakthrough") time depends critically on the length and the initial width of the fracture and, for the majority of realistic cases, it covers a time range from a few thousand years to ten million years in limestones. The modeling results give a clear explanation of the operation of selectivity in cave genesis. In a typical unconfined karst aquifer there is a great range of enlargement rates along the competing flow routes, and only a few conduits will grow to enterable size. The modeling also provides one starting point (others are discussed in Chapter 5.2) to explain uniform maze patterns, which will be favored by enlargement of all openings at comparable rates where the discharge/length ratio is great enough. Single-conduit modeling has the virtue of revealing how the cave-forming variables relate to each other in the simplest possible way. Although it is more difficult to extend this approach to two dimensions, many have done so (e.g. Groves & Howard, 1994; Howard & Groves, 1995; in this volume ? Ford, Ewers and Lauritzen, Section 4.2.1; Dreybrodt and Siemers, Section 4.2.4, and Sauter and Liedl, Section 4.2.5). The modeling performed by Dreybrodt and Siemers shows that the main principles of breakthrough derived from one-dimensional models remain valid. The evolution of karst aquifers has been modeled for a variety of different geological settings, including also variation in lithology with respect to the dissolution kinetics. Sauter and Liedl simulate the development of conduits at a catchment scale for fissured carbonate rocks with rather large initial openings (about 1 mm). The approach is based upon hydraulic coupling of a pipe network to matrix continuum in order to represent the well-known duality of karst aquifer flow systems. It is also shown how understanding of the genesis of karst aquifers and modeling of their development can assist in characterization of the conduit system, which dominates flow and transport in karst aquifers. An important point that has emerged from cave studies of the last three decades is that no single speleogenetic model applies to all geologic and hydrologic settings. Given that settings may also change systematically during the evolutionary geological cycles outlined above (Chapter 3.1), an evolutionary approach is called for. This is attempted in Part 5, which is organized to give extended accounts of speleogenesis in the three most important settings that we recognize: coastal and oceanic (Chapter 5.1), deep-seated and confined (Chapter 5.2) and unconfined (Chapter 5.3). Each Chapter begins with a review of modern ideas on cave development in the setting, followed by representative case studies. The latter include new accounts of some "classic" caves as well as descriptions of other, little-known cave systems and areas. Readers may determine for themselves how well the real field examples fit the general models presented in the introductory sections. Mylroie and Carew in Chapter 5.1 summarize specific features of cave and karst development in young rocks in coastal and island settings that result from the chemical interactions between fresh and salt waters, and the effects of fluctuating sea level during the Quaternary. The case studies include a review of syngenetic karst in coastal dune limestones, Australia (S.White, 5.1.1) and an example of speleogenesis on tectonically active carbonate islands (Gunn and Lowe, 5.1.2). Klimchouk in Chapter 5.2 reviews conditions and mechanisms of speleogenesis in deep-seated and confined settings, one of the most controversial but exciting topics in modern cave research. Conventional karst/speleogenetic theories are concerned chiefly with shallow, unconfined geologic settings, supposing that the karstification found there is intimately related to surface conditions of input and output, with the dissolution being driven by downward meteoric water recharge. The possibility of hypogenic karstification in deeper environments has been neglected for a long time, and the quite numerous instances of karst features found at significant depths have usually been interpreted as buried paleokarst. However, the last decade has seen a growing recognition of the variety and importance of hypogene dissolution processes and of speleogenesis under confined settings which often precedes unconfined development (Hill, 1987, 1995; Klimchouk, 1994, 1996, 1997; Lowe, 1992; Lowe & Gunn, 1995; Mazzullo & Harris, 1991, 1992; Palmer, 1991, 1995; Smart & Whitaker, 1991; Worthington, 1991, 1994; Worthington & Ford, 1995). Confined (artesian) settings were commonly ignored as sites for cave origin because the classic concept of artesian flow implies long lateral travel distances for groundwater within a soluble unit, resulting in a low capacity to generate caves in the confined area. However, the recognition of non-classical features in artesian flow, namely the occurrence of cross-formation hydraulic communication within artesian basins, the concepts of transverse speleogenesis and of the inversion of hydrogeologic function of beds in a sequence, allows for a revision of the theory of artesian speleogenesis and of views on the origin of many caves. It is proposed that artesian speleogenesis is immensely important to speleo-inception and also accounts for the development of some of the largest known caves in the world. Typical conditions of recharge, the flow pattern through the soluble rocks, and groundwater aggressiveness favor uniform, rather than competing, development of conduits, resulting in maze caves where the structural prerequisites exist. Cross-formational flow favors a variety of dissolution mechanisms that commonly involve mixing. Hydrogeochemical mechanisms of speleogenesis are particularly diverse and potent where carbonate and sulfate beds alternate and within or adjacent to hydrocarbon-bearing sedimentary basins. Hypogene speleogenesis occurs in rocks of varied lithology and can involve a variety of dissolution mechanisms that operate under different physical constraints but create similar cave features. Case studies include the great gypsum mazes of the Western Ukraine (Klimchouk, Section 5.2.1), great maze caves in limestones in Black Hills, South Dakota (Palmer, Section 5.2.2) and Siberia (Filippov, Section 5.2.3), karstification in the Redwall aquifer, Arizona (Huntoon, Section 5.2.4), hydrothermal caves in Hungary (Y.Dublyansky, Section 5.2.6), and sulfuric acid speleogenesis (Lowe, Bottrell and Gunn, Section 5.2.7, and Hill, Section 5.2.8). Y.Dublyansky summarizes the peculiar features of hydrothermal speleogenesis (Section 5.2.5), and V.Dublyansky describes an outstanding example of a hydrothermal cavity, in fact the largest ever recorded by volume, in the Rhodope Mountains (Section 5.2.9). Recognition of the scale and importance of deep-seated speleogenesis and of the hydraulic continuity and cross-formational communications between aquifers in artesian basins is indispensable for the correct interpretation of evolution of karst aquifers, speleogenetic processes and associated phenomena, regional karst water-resource evaluations, and the genesis of certain karst-related mineral deposits. These and other theoretical and practical implications still have to be developed and evaluated, which offers a wide field for further research efforts. Ford in Chapter 5.3 reviews theory of speleogenesis that occurs where normal meteoric waters sink underground through the epikarst or dolines and stream sinks, etc. and circulate in the limestone or other soluble rocks without any major artesian confinement. These are termed common caves (Ford & Williams, 1989) because they probably account for 90% or more of the explored and mapped dissolutional caves that are longer than a few hundred meters. This estimate reflects the bias in exploration; caves formed in unconfined settings and genetically related to surface recharge are the most readily accessible and hence form the bulk of documented caves. Common caves display chiefly the branchwork forms where the dissolutional conduits occupy only a tiny proportion of the total length or area of penetrable fissures that is available to the groundwaters. The rules that govern the selection of the successful linkages that will be enlarged into the branchwork pattern are supported in the models presented in Chapter 4.2. In the long section caves may be divided into deep phreatic, multi-loop, mixed loop and water table, and ideal water table types, with drawdown vadose caves or invasion vadose caves above them. Many large systems display a mixture of the types. The concepts of plan pattern construction, phreatic, water table or vadose state, and multi-phase development of common caves are illustrated in the case studies that follow the introduction. They are organized broadly to begin with examples of comparatively simple deep phreatic and multi-loop systems (El Abra, Mexico, Ford, Section 5.3.1 and Castleguard Cave, Canada, Ford, Lauritzen and Worthington, Section 5.3.2), proceeding to large and complex multi-phase systems such as the North of Thun System, Switzerland (Jeannin, Bitterly and Hauselmann, Section 5.3.3) and Mammoth Cave, Kentucky (Palmer, Section 5.3.8), to representatives of mixed vadose and phreatic development in mountainous regions (the Alps, Audra, Section 5.3.4; the Pyrenees, Fernandez, Calaforra and Rossi, Section 5.3.5; Mexico, Hose, Section 5.3.6) and where there is strong lithologic or structural control (Folded Appalachians, W.White, Section 5.3.7; gypsum caves in the South of Spain, Calaforra and Pulido-Bosch, Section 5.3.10). Two special topics are considered by W.White in Section 5.3.9 (Speleogenesis of vertical shafts in the eastern US) and Palmer (Maze origin by diffuse recharge through overlying formation). The set concludes with two instances of nearly ideal water table cave development (in Belize and Hungary, Ford, Section 5.3.12), and a review of the latest models of speleogenesis from the region where modern karst studies in the West began, the Classical Karst of Slovenia and Trieste (?u?ter?ic, Section 5.3.13). In Parts 2-5 attention is directed primarily on how the gross geometry of a cave system is established. Part 6 switches focus to the forms at meso- and micro- scales, which can be created during enlargement of the cave. Lauritzen and Lundberg in Chapter 6.1 summarize the great variety of erosional forms ( speleogenetic facies ) that can be created by a wide range of speleogenetic agents operating in the phreatic or vadose zones. Some forms of cave passages have been subject to intensive research and may be interpreted by means of simple physical and chemical principles, but many others are polygenetic and hence difficult to decipher with certainty. However, in addition to the analysis of cave patterns (see Chapter 3.4), each morphological element is a potential tool that can aid our inferences on the origin of caves and on major characteristics of respective past hydrogeological settings. In Chapter 6.2 E.White and W.White review breakdown morphology in caves, generalizing that the processes are most active during the enlargement and decay phases of cave development. Early in the process breakdown occurs when the flow regime shifts from pipe-full conditions to open channel conditions (i.e. when the roof first loses buoyant support) and later in the process breakdown becomes part of the overall degradation of the karst system. The chapter addresses the mechanism of breakdown formation, the geological triggers that initiate breakdown, and the role that breakdown plays in the development of caves. As the great majority of both theoretical considerations and case studies in this book deal with speleogenesis in carbonate rocks, it is useful to provide a special forum to examine dissolution cave genesis in other rocks. This is the goal of Part 7. Klimchouk (7.1) provides a review of speleogenesis in gypsum. This appears to be a useful playground for testing the validity and limitations of certain general speleogenetic concepts. Differences in solution kinetics between gypsum and calcite impose some limitations and peculiar features on the early evolution of conduits in gypsum. These peculiarities appear to be an extreme and more obvious illustration of some rules of speleogenetic development devised from conceptual and digital modeling of early conduit growth in limestones. For instance, it is shown (e.g. Palmer, 1984, 1991; Dreybrodt, 1996; see also Chapter 3.4 and Section 4.2.2) that initiation of early, narrow and long pathways does not seem feasible under linear dissolution rate laws (n=1) due to exponential decrease of the dissolution rates. Although the dissolution kinetics of gypsum are not well known close to equilibrium it is generally assumed that they are controlled entirely by diffusion and therefore linear. If dissolution of gypsum is solely diffusion-controlled, with no change in the kinetic order, conduit initiation could not occur in phreatic settings or by lateral flow through gypsum from distant recharge areas in artesian settings. Hence, the fact that maze caves are common in gypsum in artesian conditions (see Section 5.2.1) gives strong support to a general model of "transverse" artesian speleogenesis where gypsum beds are underlain by, or sandwiched between, insoluble or low-solubility aquifers (Chapter 5.2), and suggests that it may be applicable to cave development in carbonates. In unconfined settings, speleogenesis in gypsum occurs along fissures wide enough to support undersaturated flow throughout their length. Linear or crudely branching caves overwhelmingly predominate, which rapidly adjust to the contemporary geomorphic setting and to the maximum available recharge. Also, if considerable conduit porosity has been created in deep-seated settings, it provides ready paths for more intense groundwater circulation and further cave development when uplift brings the gypsum into the shallow subsurface. Speleogenesis in salt, reviewed in general and exemplified by the Monte Sedom case in Israel (Frumkin, Chapter 7.2), has been documented only in open, unconfined settings, where it provides a model for simple vadose cave development. Chapter 7.3 deals with speleogenesis in quartzites, illustrated by case studies from southeastern Minas Gerais, Brasil (Correa Neto, 7.3.1) and South Africa (Martini, 7.3.2). The process involves initial chemical weathering of the quartzite to create zones of friable rocks (sanding, or arenisation) which then are removed by piping, with further conduit enlargement due to mechanical erosion by flowing water. Part 8 combines the theoretical with some applied aspects of speleogenetic studies. Worthington, Ford and Beddows (8.1) show the important implications of what might be termed "speleogenetic wisdom" when studying ground water behaviour in karst. They examine some standard hydrogeological concepts in the light of knowledge of caves and their patterns, considering a range of case studies to identify the characteristic enhancement of porosity and permeability due to speleogenesis that occurs in carbonate rocks. The chapter focuses on unconfined carbonate aquifers as these are the most studied from the speleological perspective and most important for water supplies. Four aquifers, differing in rock type, recharge type (allogenic and autogenic), and age (Paleozoic, Mesozoic and Cenozoic), are described in detail to demonstrate the extent of dissolutional enhancement of porosity and permeability. It is shown that all four cases are similar in hydraulic function, despite the fact that some of them were previously characterized as different end members of a "karst ? non-karst" spectrum. Enhancement of porosity by dissolution is relatively minor: enhancement of permeability is considerable because dissolution has created dendritic networks of channels able to convey 94% or more of all flow in the aquifer, with fractures providing a small proportion and the matrix a negligible amount. These conclusions may be viewed as a warning to hydrogeologists working in carbonate terranes: probably the majority of unconfined aquifers function in a similar manner. Sampling is a major problem in their analysis because boreholes (the conventional exploration tool in hydrogeology) are unlikely to intersect the major channels that are conveying most of the flow and any contaminants in it. It is estimated, using examples of comprehensively mapped caves, that the probability of a borehole intersecting a conduit ranges from 1 in 50 to 1 in 1000 or more. Boreholes simply cannot be relied upon to detect the presence of caves or to ?characterise? the hydrologic functioning of cavernous aquifers. Wherever comprehensive evidence has been collected in unconfined carbonate aquifers (cave mapping plus boreholes plus lab analysis of core samples) it suggests that dissolution inexorably results in a similar structure, with channel networks providing most of the permeability of the aquifer, yet occupying a very minor fraction of its volume (Worthington, Ford and Beddows). Lowe (Chapter 8.2) focuses on developments in understanding the vital role played by karstic porosity, (broadly viewed as being the product of speleogenesis), in the migration of mineralizing fluids (or hydrocarbons) and in their deposition (or storage), and comments on the potential role of new speleogenetic concepts in developing greater understanding in the future. Although some early workers were clearly aware of actual evidence for some kind of relationship, and others noted its theoretical likelihood, it has been ignored by many until relatively recent times. This shortfall has gradually been redressed; new understanding of the extent and variety of karst processes is ensuring that new relationships are being recognized and new interpretations and models are being derived. The chapter does not pretend to give a comprehensive account of the topic but clearly demonstrates the wide applicability of speleogenetic knowledge to issues in economic geology. In Chapter 8.3 Aley provides an overview of the water and land-use problems that occur in areas with conduit aquifers. He stresses that sound land management must be premised on an understanding that karst is a three-dimensional landscape where the surface and subsurface are intimately and integrally connected. Failure to recognize that activity at the surface affects the subsurface, and the converse, has long been the root cause of many of the problems of water and land use in karst regions. Karst areas have unique natural resource problems, whose management can have major economic consequences. Although there is an extensive literature on the nature of particular problems, resource protection and hazard minimization strategies in karst, it rarely displays an advanced understanding of the processes of the conduit formation and their characteristics yet these will always be involved. This book does not pretend to be a definitive text on speleogenesis. However, it is hoped that readers will find it to be a valuable reference source, that it will stimulate new ideas and approaches to develop and resolve some of the remaining problems, and that it will promote an appreciation of the importance of speleogenetic studies in karst hydrogeology and applied environmental sciences. Acknowledgements: We sincerely thank all contributors for their willing cooperation in the long and difficult process of preparing this book, for their participation in developing its logic and methodology and their cheerful response to numerous requests. We thank all colleagues who discussed the work with us and encouraged it in many ways, even though not contributing to its content as authors. We are particularly grateful to Margaret Palmer for invaluable help in editing the English in many contributions, to Nataly Yablokova for her help in performing many technical tasks and to Elizabeth White who prepared comprehensive index. Our thanks are due to Dr. David Drew, Dr. Philip LaMoreaux, Dr. George Moore and Prof. Marian Pulina for reviewing the manuscript and producing constructive notes and comments on improvement of the final product. The organizational costs and correspondence related to the preparation of the book were partially sponsored by the National Speleological Society, the publisher. We thank David McClurg, the Chair of the NSS Special Publication Committee, for his extensive technical and organizational support in the preparation and publishing processes.

On flow and transport of miscible tracers in the vadose zone, 2000, Loboferreira J. P. , Leitã, O Teresa, Quigley Seá, N P. , Theves Thomas

The paper presents a synthesis of LNEC's contribution to the European Commission (DGXII) Contract n° CI1*-CT94-0014 (DG 12 HSMU), based on the results reported by Lobo-Ferreira et al. (1998). The main contribution of LNEC to the project was the development of flow and transport experiments, for different flow type conditions (i.e. saturated and unsaturated). These included experiments at: (1) different scales (two scales in the laboratory and one in a medium scale - artificial aquifer), (2) different saturation conditions, and (3) different tracers (MgCl2, CaCl2, NO3-, Ni, Cd). The goals of the experiments were threefold: (1) analysis and quantification of the physical parameters that control circulation in this zone (hydraulic conductivity correspondent to the degree of saturation etc.); (2) determination and quantification of the more important processes that control the chemical behaviour of heavy metals and nitrate, and (3) to obtain data for calibrating the numerical models.


Mn-Fe deposits in shallow cryptic marine environment: examples in northwestern Mediterranean submarine caves, 2001, Allouc J, Harmelin Jg,
Black coating of hard substrates by Mn and Fe oxides has long been reported from shallow, dark, submarine caves. However, these littoral metallic deposits have never been studied in detail, despite expected analogies with deep-sea polymetallic crusts. Submarine caves are characterized by darkness and low rates of exchanges with the open sea. Lack of primary production and confinement of inner water bodies result in marked oligotrophy and extremely reduced biomass, i.e. conditions close to those prevailing in deep-sea habitats. Field evidences suggested that the formation of Mn-Fe coatings was closely tied to these particular environmental conditions. The goal of this study was to examine the detailed features of Mn-Fe coatings from dark caves with different local conditions, and to try to identify the processes responsible for their deposition. Study sites and methods Three sublittoral, single-entrance, caves were sampled by scuba diving along the coasts of Provence (France, Mediterranean Sea) (fig. 1). The first site is a large karstic cave (Tremies Cave, 16 m depth at entrance floor, 60 m long; Marseille-Cassis area) with an ascending profile which results in a buffered thermal regime and markedly oligotrophic conditions due to warm water trapping in its upper part (fig. 1 and 2). Wall fragments were sampled at 30 m (medium confinement : zone B) and 60 in (strong confinement : zone C) from the cave entrance. The second site is a large tubular cavity open in conglomerate formations (3PP Cave, 15 m depth at entrance floor, 120 m long; La Ciotat) with a descending profile which results in relative permanence of winter temperatures within the inner parts, complex water circulation and presumed greater input of sedimented particles than in the preceding cave (fig.1 and 2). Wall samples were taken at 25 m, 70 in and 100 m from entrance. The third site is a small, horizontal, cave open in quartzite formations (Bagaud Cave, 7 in depth at entrance floor, about 10 m long; WNW of Port-Cros Island, bay of Hyeres). Sampling was performed on walls of a narrow corridor between an anterior room and a smaller inner room. A sporadic outflow of continental waters is located in the inner room. The samples were preserved in 50% ethylic alcohol or studied soon after their sampling. Before carbon coating and SEM examination, or microanalyses with SEM-associated spectrometers, they were treated in a 33% Chlorox solution and thereafter washed in demineralized water and dried. Micromorphology At low-medium magnification (<20,000), the aspect of coatings varies between caves and, especially, between inner-cave locations. All the described structures are made up of Mn and Fe oxides. In Tremies Cave, coatings of walls from zone B are composed of irregular erected constructions (height : 10s to 100s μm) formed by the aggregation of roughly ovoid primary concretions of about 10 μm (fig. 3). The surface of those primary concretions displays numerous lacunose to reticulate films (pores, about 0.5 μm in diameter, are often subrounded). Remnants of these films and organomorphic corpuscles occur also within the primary concretions (fig. 4). On younger substrates (broken wall exposed since 1970), primary concretions are poorly developed and no prominent construction is visible (fig. 5). In more confined conditions (zone C), the erected constructions of ancient coatings are smaller and less numerous than in zone B but are well individualized (fig. 6). In this zone: C, besides some remnants of lacunose to reticulate films (fig. 7), there is an appearance of filaments and ovoid corpuscles (height/width : 10-30/5-15 μm), which seem to be linked to filaments by a short stalk (fig. 8). In 3 PP Cave, at 25-70 m from entrance, wall coatings present porous heaps of primary concretions (fig. 9). The surface and the inside of the latter comprise remnants of lacunose to reticulate films that evoke those observed in Tremies Cave (fig. 10 and 11). On younger substrates (hard parts of sessile invertebrates), coatings are restricted to micrometric organomorphic corpuscles with some remnants of lacunose or fibrous films (fig. 12). At 100 in from the entrance, coatings are shaped by numerous erected constructions, more or less coalescing (fig. 13). Besides remnants of lacunose films, the primary concretions contain interlacing filaments (diameter : 0.2-0.3 μm) forming cords or veils (fig. 14). In Bagaud Cave, the primary concretions are aggregated in irregular heaps (fig. 15). Lacunose films are particularly frequent and tend to form three-dimensional mamillated structures that were not observed in the other caves (fig. 16). In particular, there is an appearance of tubular structures (fig. 17) and of numerous hemispheroidal structures (diameter : 4-5 μm) with an upper orifice (fig. 18 and 19). At higher magnification (20,000), whatever the cave and inner-cave location, the aspect of oxide deposits is rather smooth or, especially, microgranular (fig. 20). Mineral composition The composition of coatings is different between caves and according to their inner-cave location. In both large caves (Tremies and 3 PP), the Mn/Fe ratio increases with the distance from the cave entrance, i.e. when exchanges with the open sea diminish (fig. 21a). This trend is particularly clear in Tremies Cave, where the confinement gradient is strongly marked. Besides, the Mn/Fe ratio also seems to increase when films are present in the analysed volume (some cubic micrometers) (fig. 21b). In Bagaud Cave, the Mn/Fe ratio reaches high values despite the small size of this cave and its low confinement level. Discussion and conclusions SEM observations suggest that in each studied cave, the Mn-Fe coatings are biosedimentary deposits. Genesis of these deposits is assumed to result mainly from the replacement of biofilms (composed of cells and slime, i.e, of extracellular polymeric substance produced by microorganisms) generated by microbial populations colonizing the cave walls. Considering the darkness of the cave-locations, microbes consist mainly in bacteria, but fungi are probably responsible for the filaments and ovoids corpuscules (evoking sporocysts) occurring in innermost parts. Observations at different scales of the morphological features of oxide deposits reveal a structured organisation which varies along the strong environmental gradients (particularly the confinement level) that occur from the entrance to the innermost parts : erected constructions made up of primary concretions become more and more defined and acquire a pseudo-columnar shape. The aspect of biofilms appears to be controlled by the same environmental parameters. In open or relatively open environments, they frequently show a three-dimensional development (with frequent skullcape-like shapes), while in more confined conditions they exhibit a planar layout. These changes reflect either the adaptation of the slime-producing bacteria to the local trophic resources (correlated to the rate of exchange with the open sea) and water movements, or spatial replacement of taxa. It is assumed that slime (mainly composed of water and exopolysaccharides) induces a local increase of the concentration in dissolved Mn and acts as an ion exchange resin that allows the retention of Mn on the functional groups of EPS. These conditions promote the nucleation of Mn oxide crystallites in the slime. Then. the anionic character of Mn oxides in seawater, and their capacity to catalyse the oxydation of Mn2 to Mn4, allow the process to go on without any other biological intervention; thus, the process of crystal growth becomes possible. In caves where Mn is only supplied by seawater (Tremies and 3 PP), the average value of the Mn/Fe ratio of coatings is negatively correlated to the local availability of nutrients. This trend is probably linked to changes in the selectivity of slimes towards the processes of retention of cations, because this ratio is clearly influenced by the occurrence of biofilms. However, independently from trophic resources, the Mn/Fe ratio can be notably increased when additional Mn is provided by the seeping or flowing of continental waters (Bagaud Cave)

Timescales for nitrate contamination of spring waters, northern Florida, USA., 2001, Katz B. G. , Bohlke J. K. , Hornsby H. D.

Timescales for nitrate contamination of spring waters, northern Florida, USA, 2001, Katz B. G. , Bohlke J. K. , Hornsby H. D. ,
Residence times of groundwater, discharging from springs in the middle Suwannee River Basin, were estimated using chlorofluorocarbons (CFCs), tritium ((3) H), and tritium/helium-3 (H-3/He-3) age-dating methods to assess the chronology of nitrate contamination of spring waters in northern Florida. During base-flow conditions for the Suwannee River in 1997-1999, 17 water samples were collected from 12 first, second, and third magnitude springs discharging groundwater from the Upper Floridan aquifer. Extending age-dating techniques, using transient tracers to spring waters in complex karst systems, required an assessment of several models [piston-flow (PFM), exponential mixing (EMM), and binary-mixing (BMM)] to account for different distributions of groundwater age. Multi-tracer analyses of four springs yielded generally concordant PFM ages of around 20 2 years from CFC- 12, CFC- 113, H-3, and He-3. with evidence of partial CFC- 11 degradation. The EMM gave a reasonable fit to CFC- 113, CFC- 12. and H-3 data, but did not reproduce the observed He-3 concentrations or H-3/He-3 ratios, nor did a combination PFM-EMM. The BMM could reproduce most of the multi-tracer data set only if both endmembers had H-3 concentrations not much different front modern values. CFC analyses of 14 additional springs yielded apparent PFM ages from about 10 to 20 years from CFC- 113, with evidence of partial CFC- 11 degradation and variable CFC-12 contamination. While it is not conclusive, with respect to the age distribution within each spring, the data indicate that the average residence times were in the order of 10-20 years and were roughly proportional to spring magnitude. Applying similar models to recharge and discharge of nitrate based on historical nitrogen loading data yielded contrasting trends for Suwanee County and Lafayette County. In Suwance County, spring nitrate trends and nitrogen isotope data were consistent with a peak in fertilizer input in the 1970s and a relatively high overall ratio of artificial fertilizer/manure whereas in Lafayette County, spring nitrate trends and nitrogen isotope data were consistent with a more monotonic increase in fertilizer input and relatively low overall ratio of artificial fertilizer/manure. The combined results of this study indicate that the nitrate concentrations of springs in the Suwannee River basin have responded to increased nitrogen loads from various sources in the watersheds over the last few decades, however, the responses have been subdued and delayed because the average residence time of groundwater discharging from springs are in the order of decades. (C) 2001 Published by Elsevier Science B.V

Sediments and stratigraphy in rockshelters and caves: A personal perspective on principles and pragmatics, 2001, Farrand Wr,
Over the last half century the study of rockshelter and cave sediments has evolved from straightforward descriptive analysis to sophisticated examination on several scales-from field observations to bulk laboratory analyses to microscopic examination. Still an integrated theory to guide the interpretation of these analyses does not exist, in part because of the idiosyncratic nature of individual eaves and rockshelters. This paper reviews studies that couple field observations with laboratory analyses including particle size, pebble morphology, chemical, and mineralogical studies to provide, first, the necessary basic description of the sediments and, second, an interpretation of the environment of sedimentation. These studies can lead to an understanding of site-formation processes during human occupation, and eventually to a reconstruction of local and, in some cases, regional paleoclimates. Furthermore, sediment study is essential for intrasite correlation, independent of artifact, faunal, floral, and radiometric techniques. Finally, it is emphasized that close cooperation among sedimentologists, archaeologists, and biological specialists during planning, excavation, and interpretative stages is crucial to a successfully integrated study. (C) 2001 John Wiley & Sons, Inc

Palaeowaters in European coastal aquifers -- the goals and main conclusions of the PALAEAUX project, 2001, Edmunds Wm,
The PALAEAUX project has brought together up-to-date geochemical, isotopic and hydrogeological information on coastal groundwaters across Europe in a transect from the Baltic to the Canary Islands. These data have been interpreted in relation to past climatic and environmental conditions, as well as extending and challenging concepts about the evolution of groundwater near the present day coastlines. Groundwater movement beyond the present coastline as well as emplacement on shore to greater depths (up to 500 m) than allowed by the present-day flow regime has occurred, hence offshore freshwater reserves are inferred in some coastal areas. The main attributes of palaeowaters, in terms of water quality, are their high bacterial purity, total mineralization that is often less than that of modern waters and being demonstrably free of anthropogenic chemicals. However, in the Mediterranean coastal areas, lower recharge leads to higher salinity conditions in both palaeo- and modern waters. Freshwater of high quality originating from different climatic conditions to the present day, when the sea level was much lower, is found at depth beneath the present-day coastline in several countries. Recharge is shown to have been more or less continuous during the past 100 ka, even beneath the ice, as demonstrated by groundwaters from Estonia, having {delta}O values of c. -22%o. However, elsewhere (UK and Belgium) an age gap can be recognized indicating that no recharge took place at the time of the last glacial maximum. Devensian recharge temperatures (soil air temperatures) were some 6{degrees}C colder across Europe than at the present day. The development of aquifers in Europe during the past 50-100 a, by abstraction from boreholes, has generally disturbed flow systems that have evolved over varying geological timescales, especially those derived from the Late Pleistocene and Holocene. Hydrogeophysical logging has demonstrated time and quality stratified aquifers resulting in mixed waters being produced on pumping. A range of specific indicators, including 3H, 3H/3He, 85Kr, chlorofluoro-carbons and pollutants, have been used to recognize the extent to which waters from the modern (industrial) era have penetrated into the aquifers, often replacing the natural palaeogroundwaters. In the coastal regions, many problems for management are identified, including issues relating to quantity and quality of water, seasonal demand, pollution risks and ecosystem damage, requiring a new look at legislation

Speleothem evidence from Oman for continental pluvial events during interglacial periods, 2001, Burns Sj, Fleitmann D, Matter A, Neff U, Mangini A,
Growth periods and stable isotope analyses of speleothems from Hoti Cave in northern Oman provide a record of continental pluvial periods extending back over the past four of Earth's glacial-interglacial cycles. Rapid speleothem growth occurred during the early to middle Holocene (6-10.5 ka B.P.), 78-82 ka B.P., 120-135 ka B.P., 180-200 ka B.P., and 300-325 ka B.P. The speleothem calcite deposited during each of these episodes is highly depleted in 18O compared to modern speleothems. The {delta}18O values for calcite deposited within pluvial periods generally fall in the range of -4{per thousand} to -8{per thousand} relative to the Vienna Peedee belemnite standard, whereas modern speleothems range from -1{per thousand} to -3{per thousand}. The growth and isotopic records indicate that during peak interglacial periods, the limit of the monsoon rainfall was shifted far north of its present location and each pluvial period was coincident with an interglacial stage of the marine oxygen isotope record. The association of continental pluvial periods with peak interglacial conditions suggests that glacial boundary conditions, and not changes in solar radiation, are the primary control on continental wetness on glacial-interglacial time scales

Results 16 to 30 of 116
You probably didn't submit anything to search for